ZenphotoCMS 1.6.5

SMTP
in package

misc

PHPMailer RFC821 SMTP email transport class.

Implements RFC 821 SMTP commands and provides some utility methods for sending mail to an SMTP server.

Constants

DEBUG_CLIENT = 1: Debug level to show client -> server messages.
DEBUG_CONNECTION = 3: Debug level to show connection status, client -> server and server -> client messages.
DEBUG_LOWLEVEL = 4: Debug level to show all messages.
DEBUG_OFF = 0: Debug level for no output.
DEBUG_SERVER = 2: Debug level to show client -> server and server -> client messages.
DEFAULT_PORT = 25: The SMTP port to use if one is not specified.
DEFAULT_SECURE_PORT = 465: The SMTPs port to use if one is not specified.
LE = "\r\n": SMTP line break constant.
MAX_LINE_LENGTH = 998: The maximum line length allowed by RFC 5321 section 4.5.3.1.6, *excluding* a trailing CRLF break.
MAX_REPLY_LENGTH = 512: The maximum line length allowed for replies in RFC 5321 section 4.5.3.1.5, *including* a trailing CRLF line break.
VERSION = '6.9.2': The PHPMailer SMTP version number.

Properties

$Debugoutput : string|callable|LoggerInterface: How to handle debug output.
$do_debug : int: Debug output level.
$do_verp : bool: Whether to use VERP.
$Timelimit : int: How long to wait for commands to complete, in seconds.
$Timeout : int: The timeout value for connection, in seconds.
$xclient_allowed_attributes : array<string|int, mixed>: Allowed SMTP XCLIENT attributes.
$error : array<string|int, mixed>: Error information, if any, for the last SMTP command.
$helo_rply : string|null: The reply the server sent to us for HELO.
$last_reply : string: The most recent reply received from the server.
$last_smtp_transaction_id : string|bool|null: The last transaction ID issued in response to a DATA command, if one was detected.
$server_caps : array<string|int, mixed>|null: The set of SMTP extensions sent in reply to EHLO command.
$smtp_conn : resource|null: The socket for the server connection.
$smtp_transaction_id_patterns : array<string|int, string>: Patterns to extract an SMTP transaction id from reply to a DATA command.

Methods

authenticate() : bool: Perform SMTP authentication.
client_send() : int|bool: Send raw data to the server.
close() : mixed: Close the socket and clean up the state of the class.
connect() : bool: Connect to an SMTP server.
connected() : bool: Check connection state.
data() : bool: Send an SMTP DATA command.
getDebugLevel() : int: Get debug output level.
getDebugOutput() : string: Get debug output method.
getError() : array<string|int, mixed>: Get the latest error.
getLastReply() : string: Get the last reply from the server.
getLastTransactionID() : bool|string|null: Get the queue/transaction ID of the last SMTP transaction If no reply has been received yet, it will return null.
getServerExt() : string|bool|null: Get metadata about the SMTP server from its HELO/EHLO response.
getServerExtList() : array<string|int, mixed>|null: Get SMTP extensions available on the server.
getTimeout() : int: Get SMTP timeout.
getVerp() : bool: Get VERP address generation mode.
hello() : bool: Send an SMTP HELO or EHLO command.
mail() : bool: Send an SMTP MAIL command.
noop() : bool: Send an SMTP NOOP command.
quit() : bool: Send an SMTP QUIT command.
recipient() : bool: Send an SMTP RCPT command.
reset() : bool: Send an SMTP RSET command.
sendAndMail() : bool: Send an SMTP SAML command.
setDebugLevel() : mixed: Set debug output level.
setDebugOutput() : mixed: Set debug output method.
setTimeout() : mixed: Set SMTP timeout.
setVerp() : mixed: Enable or disable VERP address generation.
startTLS() : bool: Initiate a TLS (encrypted) session.
turn() : bool: Send an SMTP TURN command.
verify() : bool: Send an SMTP VRFY command.
xclient() : bool: Send SMTP XCLIENT command to server and check its return code.
edebug() : mixed: Output debugging info via a user-selected method.
errorHandler() : mixed: Reports an error number and string.
get_lines() : string: Read the SMTP server's response.
getSMTPConnection() : false|resource: Create connection to the SMTP server.
hmac() : string: Calculate an MD5 HMAC hash.
parseHelloFields() : mixed: Parse a reply to HELO/EHLO command to discover server extensions.
recordLastTransactionID() : bool|string|null: Extract and return the ID of the last SMTP transaction based on a list of patterns provided in SMTP::$smtp_transaction_id_patterns.
sendCommand() : bool: Send a command to an SMTP server and check its return code.
sendHello() : bool: Send an SMTP HELO or EHLO command.
setError() : mixed: Set error messages and codes.

DEBUG_CLIENT

Debug level to show client -> server messages.


    public
        int
    DEBUG_CLIENT
    = 1

DEBUG_CONNECTION

Debug level to show connection status, client -> server and server -> client messages.


    public
        int
    DEBUG_CONNECTION
    = 3

DEBUG_LOWLEVEL

Debug level to show all messages.


    public
        int
    DEBUG_LOWLEVEL
    = 4

DEBUG_OFF

Debug level for no output.


    public
        int
    DEBUG_OFF
    = 0

DEBUG_SERVER

Debug level to show client -> server and server -> client messages.


    public
        int
    DEBUG_SERVER
    = 2

DEFAULT_PORT

The SMTP port to use if one is not specified.


    public
        int
    DEFAULT_PORT
    = 25

DEFAULT_SECURE_PORT

The SMTPs port to use if one is not specified.


    public
        int
    DEFAULT_SECURE_PORT
    = 465

LE

SMTP line break constant.


    public
        string
    LE
    = "\r\n"

MAX_LINE_LENGTH

The maximum line length allowed by RFC 5321 section 4.5.3.1.6, *excluding* a trailing CRLF break.


    public
        int
    MAX_LINE_LENGTH
    = 998

MAX_REPLY_LENGTH

The maximum line length allowed for replies in RFC 5321 section 4.5.3.1.5, *including* a trailing CRLF line break.


    public
        int
    MAX_REPLY_LENGTH
    = 512

VERSION

The PHPMailer SMTP version number.


    public
        string
    VERSION
    = '6.9.2'

$Debugoutput

How to handle debug output.


    public
        string|callable|LoggerInterface
    $Debugoutput
     = 'echo'

Options:

echo Output plain-text as-is, appropriate for CLI
html Output escaped, line breaks converted to <br>, appropriate for browser output
error_log Output to error log as configured in php.ini Alternatively, you can provide a callable expecting two params: a message string and the debug level:

$smtp->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";};

Alternatively, you can pass in an instance of a PSR-3 compatible logger, though only debug level output is used:

$mail->Debugoutput = new myPsr3Logger;

$do_debug

Debug output level.


    public
        int
    $do_debug
     = self::DEBUG_OFF

Options:

self::DEBUG_OFF (0) No debug output, default
self::DEBUG_CLIENT (1) Client commands
self::DEBUG_SERVER (2) Client commands and server responses
self::DEBUG_CONNECTION (3) As DEBUG_SERVER plus connection status
self::DEBUG_LOWLEVEL (4) Low-level data output, all messages.

$do_verp

Whether to use VERP.


    public
        bool
    $do_verp
     = false

$Timelimit

How long to wait for commands to complete, in seconds.


    public
        int
    $Timelimit
     = 300

Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2.

$Timeout

The timeout value for connection, in seconds.


    public
        int
    $Timeout
     = 300

Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2. This needs to be quite high to function correctly with hosts using greetdelay as an anti-spam measure.

$xclient_allowed_attributes

Allowed SMTP XCLIENT attributes.


    public
    static    array<string|int, mixed>
    $xclient_allowed_attributes
     = ['NAME', 'ADDR', 'PORT', 'PROTO', 'HELO', 'LOGIN', 'DESTADDR', 'DESTPORT']

Must be allowed by the SMTP server. EHLO response is not checked.

$error

Error information, if any, for the last SMTP command.


    protected
        array<string|int, mixed>
    $error
     = ['error' => '', 'detail' => '', 'smtp_code' => '', 'smtp_code_ex' => '']

$helo_rply

The reply the server sent to us for HELO.


    protected
        string|null
    $helo_rply

If null, no HELO string has yet been received.

$last_reply

The most recent reply received from the server.


    protected
        string
    $last_reply
     = ''

$last_smtp_transaction_id

The last transaction ID issued in response to a DATA command, if one was detected.


    protected
        string|bool|null
    $last_smtp_transaction_id

$server_caps

The set of SMTP extensions sent in reply to EHLO command.


    protected
        array<string|int, mixed>|null
    $server_caps

Indexes of the array are extension names. Value at index 'HELO' or 'EHLO' (according to command that was sent) represents the server name. In case of HELO it is the only element of the array. Other values can be boolean TRUE or an array containing extension options. If null, no HELO/EHLO string has yet been received.

$smtp_conn

The socket for the server connection.


    protected
        resource|null
    $smtp_conn

$smtp_transaction_id_patterns

Patterns to extract an SMTP transaction id from reply to a DATA command.


    protected
        array<string|int, string>
    $smtp_transaction_id_patterns
     = ['exim' => '/[\\d]{3} OK id=(.*)/', 'sendmail' => '/[\\d]{3} 2\\.0\\.0 (.*) Message/', 'postfix' => '/[\\d]{3} 2\\.0\\.0 Ok: queued as (.*)/', 'Microsoft_ESMTP' => '/[0-9]{3} 2\\.[\\d]\\.0 (.*)@(?:.*) Queued mail for delivery/', 'Amazon_SES' => '/[\\d]{3} Ok (.*)/', 'SendGrid' => '/[\\d]{3} Ok: queued as (.*)/', 'CampaignMonitor' => '/[\\d]{3} 2\\.0\\.0 OK:([a-zA-Z\\d]{48})/', 'Haraka' => '/[\\d]{3} Message Queued \\((.*)\\)/', 'ZoneMTA' => '/[\\d]{3} Message queued as (.*)/', 'Mailjet' => '/[\\d]{3} OK queued as (.*)/']

The first capture group in each regex will be used as the ID. MS ESMTP returns the message ID, which may not be correct for internal tracking.

authenticate()

Perform SMTP authentication.


    public
                    authenticate(string $username, string $password[, string $authtype = null ][, OAuthTokenProvider $OAuth = null ]) : bool

Must be run after hello().

Parameters

$username : string: The user name
$password : string: The password
$authtype : string = null: The auth type (CRAM-MD5, PLAIN, LOGIN, XOAUTH2)
$OAuth : OAuthTokenProvider = null: An optional OAuthTokenProvider instance for XOAUTH2 authentication

Return values

bool —

True if successfully authenticated

client_send()

Send raw data to the server.


    public
                    client_send(string $data[, string $command = '' ]) : int|bool

Parameters

$data : string: The data to send
$command : string = '': Optionally, the command this is part of, used only for controlling debug output

Return values

int|bool —

The number of bytes sent to the server or false on error

close()

Close the socket and clean up the state of the class.


    public
                    close() : mixed

Don't use this function without first trying to use QUIT.

connect()

Connect to an SMTP server.


    public
                    connect(string $host[, int $port = null ][, int $timeout = 30 ][, array<string|int, mixed> $options = [] ]) : bool

Parameters

$host : string: SMTP server IP or host name
$port : int = null: The port number to connect to
$timeout : int = 30: How long to wait for the connection to open
$options : array<string|int, mixed> = []: An array of options for stream_context_create()

Return values

bool

connected()

Check connection state.


    public
                    connected() : bool

Return values

bool —

True if connected

data()

Send an SMTP DATA command.


    public
                    data(string $msg_data) : bool

Issues a data command and sends the msg_data to the server, finalizing the mail transaction. $msg_data is the message that is to be sent with the headers. Each header needs to be on a single line followed by a <CRLF> with the message headers and the message body being separated by an additional <CRLF>. Implements RFC 821: DATA <CRLF>.

Parameters

$msg_data : string: Message data to send

Return values

bool

getDebugLevel()

Get debug output level.


    public
                    getDebugLevel() : int

Return values

int

getDebugOutput()

Get debug output method.


    public
                    getDebugOutput() : string

Return values

string

getError()

Get the latest error.


    public
                    getError() : array<string|int, mixed>

Return values

array<string|int, mixed>

getLastReply()

Get the last reply from the server.


    public
                    getLastReply() : string

Return values

string

getLastTransactionID()

Get the queue/transaction ID of the last SMTP transaction If no reply has been received yet, it will return null.


    public
                    getLastTransactionID() : bool|string|null

If no pattern was matched, it will return false.

Return values

bool|string|null

getServerExt()

Get metadata about the SMTP server from its HELO/EHLO response.


    public
                    getServerExt(string $name) : string|bool|null

The method works in three ways, dependent on argument value and current state:

HELO/EHLO has not been sent - returns null and populates $this->error.
HELO has been sent - $name == 'HELO': returns server name $name == 'EHLO': returns boolean false $name == any other string: returns null and populates $this->error
EHLO has been sent - $name == 'HELO'|'EHLO': returns the server name $name == any other string: if extension $name exists, returns True or its options (e.g. AUTH mechanisms supported). Otherwise returns False.

Parameters

$name : string: Name of SMTP extension or 'HELO'|'EHLO'

Return values

string|bool|null

getServerExtList()

Get SMTP extensions available on the server.


    public
                    getServerExtList() : array<string|int, mixed>|null

Return values

array<string|int, mixed>|null

getTimeout()

Get SMTP timeout.


    public
                    getTimeout() : int

Return values

int

getVerp()

Get VERP address generation mode.


    public
                    getVerp() : bool

Return values

bool

hello()

Send an SMTP HELO or EHLO command.


    public
                    hello([string $host = '' ]) : bool

Used to identify the sending server to the receiving server. This makes sure that client and server are in a known state. Implements RFC 821: HELO <SP> <CRLF> and RFC 2821 EHLO.

Parameters

$host : string = '': The host name or IP to connect to

Return values

bool

mail()

Send an SMTP MAIL command.


    public
                    mail(string $from) : bool

Starts a mail transaction from the email address specified in $from. Returns true if successful or false otherwise. If True the mail transaction is started and then one or more recipient commands may be called followed by a data command. Implements RFC 821: MAIL <SP> FROM: <CRLF>.

Parameters

$from : string: Source address of this message

Return values

bool

noop()

Send an SMTP NOOP command.


    public
                    noop() : bool

Used to keep keep-alives alive, doesn't actually do anything.

Return values

bool

quit()

Send an SMTP QUIT command.


    public
                    quit([bool $close_on_error = true ]) : bool

Closes the socket if there is no error or the $close_on_error argument is true. Implements from RFC 821: QUIT <CRLF>.

Parameters

$close_on_error : bool = true: Should the connection close if an error occurs?

Return values

bool

recipient()

Send an SMTP RCPT command.


    public
                    recipient(string $address[, string $dsn = '' ]) : bool

Sets the TO argument to $toaddr. Returns true if the recipient was accepted false if it was rejected. Implements from RFC 821: RCPT <SP> TO: <CRLF>.

Parameters

$address : string: The address the message is being sent to
$dsn : string = '': Comma separated list of DSN notifications. NEVER, SUCCESS, FAILURE or DELAY. If you specify NEVER all other notifications are ignored.

Return values

bool

reset()

Send an SMTP RSET command.


    public
                    reset() : bool

Abort any transaction that is currently in progress. Implements RFC 821: RSET <CRLF>.

Return values

bool —

True on success

sendAndMail()

Send an SMTP SAML command.


    public
                    sendAndMail(string $from) : bool

Parameters

$from : string: The address the message is from

Return values

bool

setDebugLevel()

Set debug output level.


    public
                    setDebugLevel([int $level = 0 ]) : mixed

Parameters

$level : int = 0

setDebugOutput()

Set debug output method.


    public
                    setDebugOutput([string|callable $method = 'echo' ]) : mixed

Parameters

$method : string|callable = 'echo': The name of the mechanism to use for debugging output, or a callable to handle it

setTimeout()

Set SMTP timeout.


    public
                    setTimeout([int $timeout = 0 ]) : mixed

Parameters

$timeout : int = 0: The timeout duration in seconds

setVerp()

Enable or disable VERP address generation.


    public
                    setVerp([bool $enabled = false ]) : mixed

Parameters

$enabled : bool = false

startTLS()

Initiate a TLS (encrypted) session.


    public
                    startTLS() : bool

Return values

bool

turn()

Send an SMTP TURN command.


    public
                    turn() : bool

This is an optional command for SMTP that this class does not support. This method is here to make the RFC821 Definition complete for this class and may be implemented in future. Implements from RFC 821: TURN <CRLF>.

Return values

bool

verify()

Send an SMTP VRFY command.


    public
                    verify(string $name) : bool

Parameters

$name : string: The name to verify

Return values

bool

xclient()

Send SMTP XCLIENT command to server and check its return code.


    public
                    xclient(array<string|int, mixed> $vars) : bool

Parameters

$vars : array<string|int, mixed>

Return values

bool —

True on success

edebug()

Output debugging info via a user-selected method.


    protected
                    edebug(string $str[, int $level = 0 ]) : mixed

Parameters

$str : string: Debug string to output
$level : int = 0: The debug level of this message; see DEBUG_* constants

errorHandler()

Reports an error number and string.


    protected
                    errorHandler(int $errno, string $errmsg[, string $errfile = '' ][, int $errline = 0 ]) : mixed

Parameters

$errno : int: The error number returned by PHP
$errmsg : string: The error message returned by PHP
$errfile : string = '': The file the error occurred in
$errline : int = 0: The line number the error occurred on

get_lines()

Read the SMTP server's response.


    protected
                    get_lines() : string

Either before eof or socket timeout occurs on the operation. With SMTP we can tell if we have more lines to read if the 4th character is '-' symbol. If it is a space then we don't need to read anything else.

Return values

string

getSMTPConnection()

Create connection to the SMTP server.


    protected
                    getSMTPConnection(string $host[, int $port = null ][, int $timeout = 30 ][, array<string|int, mixed> $options = [] ]) : false|resource

Parameters

$host : string: SMTP server IP or host name
$port : int = null: The port number to connect to
$timeout : int = 30: How long to wait for the connection to open
$options : array<string|int, mixed> = []: An array of options for stream_context_create()

Return values

false|resource

hmac()

Calculate an MD5 HMAC hash.


    protected
                    hmac(string $data, string $key) : string

Works like hash_hmac('md5', $data, $key) in case that function is not available.

Parameters

$data : string: The data to hash
$key : string: The key to hash with

Return values

string

parseHelloFields()

Parse a reply to HELO/EHLO command to discover server extensions.


    protected
                    parseHelloFields(string $type) : mixed

In case of HELO, the only parameter that can be discovered is a server name.

Parameters

$type : string: HELO or EHLO

recordLastTransactionID()

Extract and return the ID of the last SMTP transaction based on a list of patterns provided in SMTP::$smtp_transaction_id_patterns.


    protected
                    recordLastTransactionID() : bool|string|null

Relies on the host providing the ID in response to a DATA command. If no reply has been received yet, it will return null. If no pattern was matched, it will return false.

Return values

bool|string|null

sendCommand()

Send a command to an SMTP server and check its return code.


    protected
                    sendCommand(string $command, string $commandstring, int|array<string|int, mixed> $expect) : bool

Parameters

$command : string: The command name - not sent to the server
$commandstring : string: The actual command to send
$expect : int|array<string|int, mixed>: One or more expected integer success codes

Return values

bool —

True on success

sendHello()

Send an SMTP HELO or EHLO command.


    protected
                    sendHello(string $hello, string $host) : bool

Low-level implementation used by hello().

Parameters

$hello : string: The HELO string
$host : string: The hostname to say we are

Return values

bool

setError()

Set error messages and codes.


    protected
                    setError(string $message[, string $detail = '' ][, string $smtp_code = '' ][, string $smtp_code_ex = '' ]) : mixed

Parameters

$message : string: The error message
$detail : string = '': Further detail on the error
$smtp_code : string = '': An associated SMTP error code
$smtp_code_ex : string = '': Extended SMTP code

SMTP in package misc

Tags

Table of Contents

Constants

Properties

Methods

Constants

DEBUG_CLIENT

DEBUG_CONNECTION

DEBUG_LOWLEVEL

DEBUG_OFF

DEBUG_SERVER

DEFAULT_PORT

DEFAULT_SECURE_PORT

LE

MAX_LINE_LENGTH

Tags

MAX_REPLY_LENGTH

Tags

VERSION

Properties

$Debugoutput

$do_debug

$do_verp

Tags

$Timelimit

$Timeout

Tags

$xclient_allowed_attributes

Tags

$error

$helo_rply

$last_reply

$last_smtp_transaction_id

$server_caps

$smtp_conn

$smtp_transaction_id_patterns

Methods

authenticate()

Parameters

Tags

Return values

client_send()

Parameters

Return values

close()

Tags

connect()

Parameters

Return values

connected()

Return values

data()

Parameters

Return values

getDebugLevel()

Return values

getDebugOutput()

Return values

getError()

Return values

getLastReply()

Return values

getLastTransactionID()

Tags

Return values

getServerExt()

Parameters

Return values

getServerExtList()

Return values

getTimeout()

Return values

getVerp()

Return values

hello()

Parameters

Return values

mail()

Parameters

SMTP
in package

misc